UK’s Energy Technology Institute Backs Project to Improve Wood Waste Pretreatment : 18 Month Project to Improve of Wood Waste Purities for Energy Recovery
The UK’s Energy Technology Institute (ETI) has launched a new biomass feedstock improvement process project to show how the removal of impurities and contaminated material from sustainable biomass, inclucing wastes could make bioenergy cheaper and more efficient.
The £2.2m project will be led by national biomass specialists Forest Fuels working with Uniper Technologies.
As part of the project a prototype plant will be built to pre-treat biomass feedstocks to remove impurities at Forest Fuels’ depot near Widmerpool, Nottinghamshire.
The ETI explained that the cleaned feedstocks will then be blended and combustion tested at the University of Sheffield’s Pilot scale Advanced Capture Technology Facilities, with expert support provided by the University’s Energy 2050 Institute.
The University of Leeds is also a partner on the project and will test the ash produced during combustion testing.
Biomass fuels, including waste wood, arboricultural and forestry residues, and purpose-grown biomass feedstocks such as Miscanthus, often contain undesirable contaminants, picked up for example during harvesting, transport or storage.
According to the institute the idea behind the project is that this pre-treatment process will reduce such concentrations and therefore deliver downstream operational benefits and value.
The ETI project will use various biomass feedstocks including waste wood, energy crops and other waste arisings to test the process.
If successful, this process could lead to lower environmental and operating costs for power producers leading to a lower cost of low carbon energy.
In the UK a lot of waste wood currently ends up in landfill sites or is used in incinerators. This project is intended to take waste wood, wash it and blend it to remove impurities to make it as clean as possible in the lowest cost way.
By removing such impurities this will lead to improvements in the efficiency of biomass boilers and the feedstocks used within them.
The ETI said that it wants to show that improving the quality of biomass feedstocks in this way is a viable way of increasing the amount of sustainable sources of bioenergy, obtaining more energy from them and delivering improved greenhouse gas savings.
The intention is that once the process has been proven and tested it could then be used on other bioenergy crops and scaled up to treat larger amounts of material creating even greater efficiencies.
Peter Solly, Managing Director of Forest Fuels commented:
“Building on Forest Fuels’ experience of developing new products and markets in the virgin wood fuel sector, this project is an exciting opportunity to be at the forefront of the next generation of bioenergy feedstocks. Improving the quality of biomass feedstocks is a big opportunity for the future, and Forest Fuels is delighted to be leading this project.”
Read More
1.5MW Advanced Thermochemical Waste to Energy Project from SynTech & UK ETI
SynTech Bioenergy, LLC, has completed an agreement to build a ‘first of its kind’ commercial scale 1.5 MW advanced thermochemical waste to energy facility in the UK in partnership with the Energy Technologies Institute (ETI).
New Mobile Waste Wood Screen from Komptech
Austrian shredding equipment manufacturer, Komptech, has launched the new Multistar One star screen for the treatment of waste wood and biomass.
IN DEPTH: Can Innovation Help Gasification for Waste to Energy Rise like a Phoenix?
The high profile news of Air Products pulling out of the waste to energy business may have been announced in May, yet the fallout continues to be felt towards the end of the year.